CyberPower BR450ELCD Bedienungsanleitung PDF herunterladen (Seite 2)

Functional Test

AC Mode

The UPS delivers power to the loads derived from the utility and maintains proper battery charge. It also

regulates the output voltage to within a narrow range.

On-Battery Mode

The UPS operates on battery when the line voltage or frequency has fallen outside the limits. Local

users are alerted to this mode of operation by visual and audible indicators. The UPS provides power to

the load from the battery and through its inverter and the output voltage and frequency of the UPS are

regulated within a narrow range

1. Switch On

Press the power switch on the top panel then the “power on” LED will light up.

2. Switch Off

Press again the power switch, the “power on” LED on the top panel will go off.

3. Cold Start / Start on Battery:

This UPS can be turned on even when AC is not present.

Press the power switch on the top panel then the “power on” LED will light up.

ROUTINE MAINTENANCE AND STORAGE

ROUTINE MAINTENANCE

1. Use dry soft clothes to clean the top panel and plastic parts. Do not use any detergent that contains

alcoholic ingredient.

2. The expected lifetime of the battery is around 3 years. Improper operation and harsh environment

will reduce the actual lifetime.

3. Unplug the UPS from power inlet if the UPS will not operate for long period of time.

STORAGE

1. First turn off your UPS and disconnect its power cord from the wall outlet. Disconnect all cables

connected the UPS to avoid battery drain.

2. The UPS should be stored in a cool dry location.

3. Make sure the battery is fully charged before the UPS is stored.

4. For extended storage in moderate climates, the battery should be charged for 12 hours every 3

months by plugging the power cord into the wall receptacle. Repeat it every 2 months in high

temperature locations.

TROUBLE SHOOTING

Problem Possible Cause Solution

The battery is not fully

charged.

Recharge the battery by leaving the UPS

plugged in.

The UPS does

not perform

expected

runtime.

The battery is slightly worn

out.

Contact CyberPower Systems at

[email protected]

The on/off switch is

designed to prevent

damage by rapidly turning it

off and on.

Turn the UPS off. Wait 10 seconds and

then turn the UPS on.

The unit is not connected to

an AC outlet.

The unit must be connected to a

220-240V 50/60Hz outlet.

The battery is worn out.

Contact CyberPower Systems at

[email protected]

The UPS will not

turn on.

Mechanical problem.

Contact CyberPower Systems at

[email protected]

The circuit breaker is

tripped due to overload.

Turn the UPS off and unplug at least one

piece connected equipment. Unplug the

power cord of the UPS then remove the

fuse compartment beneath the power inlet

of the UPS and replace the blown fuse

with a spare one. Lock the compartment

back to the UPS. Connect power cord

then turn the UPS on. Make sure that your

spare fuse meets the specification.

The battery is discharged

Allow the unit to recharge for at least 4

hours.

Outlets do not

provide power to

equipment

The unit has been damaged

by a surge or spike.

Contact CyberPower Systems at

[email protected]

The USB cable is not

connected.

Connect the USB cable to the UPS unit

and an open serial port on the back of

the computer. You must use the cable

that came with the unit.

The USB cable is

connected to the wrong

port.

Try another USB port of your computer.

The unit is not providing

battery power.

Shutdown your computer and turn the

UPS off. Wait 10 seconds and turn the

UPS back on. This should reset the unit.

PowerPanel

Personal Edition

is inactive (all

icons are gray).

The serial cable is not the

cable that was provided with

the unit.

You must use the cable included with the

unit for the software.

TECHNICAL SPECIFICATIONS

Model BR 450ELCD BR 650ELCD BR 850ELCD

Capacity (VA) 450VA 650VA 850VA

Capacity (Watts) 270W 390W 510W

Input

Input Voltage Range 165-270Vac

Frequency Range 50/60 Hz+/-3Hz (Auto Sensing)

Output

On Battery Output

Voltage

Simulated Sine Wave at 230Vac +/-10%

On Battery Output

Frequency

50/60 Hz +/-1%

Overload Protection Yes

Physical

Total # of UPS

Receptacles

Schuko*6 (3 for battery backup and surge ;3 for surge )

Dimensions(mm) 271(L) x160.7(W) x113.6(H)

Weight (kg) 4.4 5.5 6.4

Battery

Sealed Maintenance

Free Lead Acid Battery

12V / 4.5Ah x1 12V / 7Ah x1 12V / 9Ah x1

Typical Recharge Time 8 Hours

Warning Diagnostics

Indicators Power On

Audible Alarms On Battery, Low Battery, Overload

Environmental

Operating Temperature +32°F to 104°F ( 0°C to 40°C )

Operating Relative

Humidity

0 to 85% NON-CONDENSING

Communication

PowerPanel

Personal

Edition Software

Windows2000/NT/XP/Server 2003/Vista/Mac OSX,Linux

Management

Auto-Charger Yes

Auto-Restart Yes

USB Interface Yes

Other Features

Green Power Yes (Energy saving technology)

Batter Charger External AAA/AA battery charger, connection via USB charger

DEFINITIONS FOR ILLUMINATED LCD INDICATORS

LCD Indication

Line mode

UPS Status Display Capacity Display Digital Value Display

Select SW

Press

Load

Cap.

Battery

Cap.

Input

Voltage

Output

Voltage

Run

Time

of Load

of Batt.

Initial V X -- X V X V

1st V X -- X V X V

2nd V X -- X V X V

3rd V X -- X X V V

4th V X -- X V X V

5th(Return) V X -- X V X V

Press >3sec

(Sound Disable)

V X V X -- -- -- -- -- -- --

Press >3sec

again

(Sound Enable)

V X X X -- -- -- -- -- -- --

(Overload) V X -- V -- -- -- -- -- -- --

“V” : Illuminated, “X” : Not Illuminated, “--“ : Either

Battery mode

UPS Status Display Capacity Display Digital Value Display

Select SW

Press

Load

Cap.

Battery

Cap.

Input

Voltage

Output

Voltage

Run

Time

of Load

of Batt.

Initial X V -- X X V V

1st X V -- X X V V

2nd X V -- X V X V

3rd X V -- X X V V

4th X V -- X X V V

5th(Return) X V -- X X V V

Press >3sec

(Sound Disable)

X V V X -- -- -- -- -- -- --

Press >3sec

again

(Sound Enable)

X V X X -- -- -- -- -- -- --

(Overload) X V -- V -- -- -- -- -- -- --

“V” : Illuminated, “X” : Not Illuminated, “--“ : Either

For more information, visit eu.cyberpowersystems.com or contact

CyberPower Systems B.V.

Flight Forum 3545 5657DW Eindhoven The Netherlands

Tel: +31 40 2348170, E-MAIL: [email protected]

CyberPower Systems Inc. (USA) 4241 12th Avenue East Suite 400 Shakopee, MN 55379, U.S.A.

Tel: +1 952 4039500, Fax: +1 952 4030009, E-MAIL: sales@cyberpowersystems.com

or in part without permission is prohibited. PowerPanel

Personal Edition is the trademark of

CyberPower Systems Inc.

CyberPower warrants to you, the original purchaser, that CyberPower UPS will be free from defects in

design, assembly, materials and workmanship for two years ( battery is only one year) from the date of

original purchase. Any warranty services, please contact your local dealers or distributors.

1 2

User’s Manual 1

Kommentare zu diesen Handbüchern

Keine Kommentare

CyberPower BR450ELCD Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Unterbrechungsfreie Stromversorgungen (USVs) CyberPower BR450ELCD