CyberPower TAA UPS Systems Bedienungsanleitung PDF herunterladen

IMPORTANT SAFETY W

ARNINGS

INSTALLING YOUR UPS SYSTEM

BATTERY REPLAC

MENT

LCD STATUS DEFINITION

BASIC OPERATION

The LCD display indicates a

variety of UPS operational

conditions. All descriptions

apply when the UPS is

plugged into the AC outlet

and turned on or when the

UPS is on battery.

689

AC INPUT

NONCRITICAL LOAD

CRITICAL LOAD

Smart App Sinewave Series

PR3000LCDRTXL2U

User’s Manual

K01-0000066-00

This manual contains important instructions that should be followed during installation and maintenance of the UPS and batteries. Please read

and follow all instructions carefully during installation and operation of the unit. Read this manual thoroughly before attempting to unpack, install,

or operate.

CAUTION! The UPS must be connected to a grounded AC power outlet with fuse or circuit breaker protection. DO NOT plug the UPS into an

outlet that is not grounded. If you need to power-drain this equipment, turn off and unplug the unit.

CAUTION! DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT! Under no circumstances this unit should be used for medical

applications involving life support equipment and/or patient care.

CAUTION! The battery can power hazardous components inside the unit, even when the AC input power is disconnected.

CAUTION! The UPS should be near the connected equipment and easily accessible.

CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity controlled indoor area, free of conductive

contaminants. (Please see specifications for acceptable temperature and humidity range).

CAUTION! To reduce the risk of an electric shock, do not remove the cover, except to service the battery. There are no user serviceable parts

inside, except for the battery.

CAUTION! To avoid electrical shock, turn off the unit and unplug it from the AC power source before servicing the battery or installing a

computer component.

CAUTION! DO NOT USE WITH OR NEAR AQUARIUMS! To reduce the risk of fire, do not use with or near aquariums. Condensation from

the aquarium can come in contact with metal electrical contacts and cause the machine to short out.

UNPACKING

The box should contain the following:

(1) UPS Unit; (1) User's Manual for UPS; (2) Rack mount Brackets; (2) Stands; (2) Skids; (1) Telephone Cable (black); (1) Emergency Power Off

Cable (gray); (1) PowerPanel

Business Edition Software CD; (2) Serial Interface Cable (DB-9); (1) USB A+B type cable; (1) Warranty

Registration Card.

OVERVIEW

The PR3000LCDRTXL2U provides battery backup, automatic voltage regulation (AVR), and optimal performance of computers and other

network equipment by ensuring consistent sinewave power. The PR3000LCDRTXL2U features 2060 Joules of surge protection, and provides

battery backup during power outages. The PR3000LCDRTXL2U ensures consistent power to your computer system and its included software

will automatically save your open files and shutdown your computer system during a utility power loss.

AUTOMATIC VOLTAGE REGULATOR(AVR)

The PR3000LCDRTXL2U can stabiliz the consistent utility power. The utility power may be damaging to important

data and hardware, but Automatic Voltage Regulation helps the computer not experience dangerous voltage

levels. Automatic Voltage Regulator automatically regulates low or high voltages to keep equipment working at

safe AC power levels (110/120V) without switching to battery. Your equipment can operate normally even meet the

power problems, such as, shout brownouts and blackouts. The unit’s powerful sealed lead-acid batteries will

provide power only if the incoming voltage drops below 80V or increases above 150V.

SYSTEM BLOCK DIAGRAM

HARDWARE INSTALLATION GUIDE

1. Battery charge loss may occur during shipping and storage. For the first time the UPS is used, it’s strongly recommended to charge batteries

for at least eight hours is recommended to ensure that the batteries’ maximum charge capacity. To recharge the batteries, simply make the UPS

plugs into an AC outlet.

2. When you use the included software, connect either the serial or the USB cable between the computer and the corresponding port on the UPS.

Note: If the USB port is used, the serial port will be disabled. They cannot be used simultaneously. The computer with the PowerPanel

Business

Edition S/W connects to the USB port or the Serial port on the UPS. It can control the operating schedule, battery test, outlet, etc. and get

information on the UPS status. However, other computers with PowerPanel

Business Edition S/W can only get UPS status information via a

LAN connection.

3. With the UPS off and unplugged, connect your computer, monitor, and any externally powered data storage device (Hard drive, Tape drive, etc.)

into the outlets. DO NOT plug a laser printer, copier, space heater, vacuum, paper shredder or other large electrical device into the UPS. The

power demands of these devices will overload and possibly damage the unit.

4. To protect a fax, telephone, modem line or network cable, connect the telephone or network cable from the wall jack outlet to the jack marked

“IN” of the UPS. Then, connect a telephone cable or network cable from the jack marked “OUT” on the UPS to the modem, computer, telephone,

fax machine, or network device.

5. Press the power switch to turn the UPS on. The Power-On indicator light will illuminate. If an overload is detected, an audible alarm will sound

and the UPS will emit one long beep. In order to reset it, turn the unit off and unplug some equipment from outlets. Make sure your equipment

carry a load current within the unit’s safe range, (refer to the technical specifications), and then turn the unit on.

6. Your UPS is equipped with an auto-charge feature. When the UPS is plugged into an AC outlet, the battery will be automatically charging, even

when the unit is switched off!

7. To always maintain an optimal battery charge, leave the UPS plugged into an AC outlet at all times.

8. Before storing the UPS for an extended period of time, turn the unit OFF. Then cover it and store it with the batteries fully charged. Recharge

the batteries every three months or so, to ensure good battery capacity and long battery life; further, this might also prevent damage to the unit

from an unlikely battery leakage.

9. The unit provides one Primary Serial Port (I), Secondary Ser city and long battery life; further, this might also prevent damage to the unit from

an unlikely battery leakage.ial Port (II), and one USB port, (paired with the Primary Serial Port), to allow connection and communication between

the unit and any attached computers. The Primary Serial Port (I) as well as its paired USB port allow for bi-directional communication among the

UPS and the primary connected computer running the PowerPanel

Business Edition S/W provided. The UPS can control the computer’s

shutdown in case of an emergency, and at the same time, the computer can monitor the UPS and alter its various programmable parameters. On

the other hand, secondary Serial Port II, only allows the UPS to initiate the connected computer’s graceful auto-shutdown in case of an

emergency.

10. EPO (Emergency Power Off) Port:

Use the provided gray cable to connect to a special EPO contact switch. Follow the appropriate circuit diagram below to wire the cable to your

EPO configuration. The EPO remote switch is a switch installed in an outside area, connected to the unit via an ordinary RJ-11 phone line. In

case of an emergency, it can be used to immediately cut-off power from the UPS unit.

FRONT / REAR PANEL DESCRIPTION

1. Power Switch

Master On/Off switch for equipment connected to the UPS.

2. Power on Indicator

Indicate that the AC utility input power’s condition is normal and that the

UPS outlets are providing power, free of surges and spikes.

3. Multifunction LCD Readout

An LCD that shows various UPS information using icons and messages.

LCD Readout Toggle Button

Used to select among a variety of information the LCD can display.

5. Battery Backup & Surge Protected Outlets

This unit provides a total of seven outlets with battery backup and surge

protection. They ensure that connected equipment will keep an

uninterrupted operation over a period of time, during a power failure.

Critical /Non-critical

It is possible to program the unit in a way so that the outle block marked as

“non-Critical”, (4 ports), will stop the provision of power to connected

equipment after a certain period of time, thus making more runtime

available for the equipment connected on the outlets marked as “Critical”,

(3 ports). In other words, the user can establish runtime priority for certain

connected equipment, maximizing its “availability” during a prolonged

power outage.

6. Input Power Cord

Heavy-duty, extra long power cord.

7. Output Circuit Breaker

The circuit breaker serves to provide output overload and fault protection.

8. Input Circuit Breaker

The circuit breaker serves to provide input overload and fault protection.

Contact your dealer, or email [email protected]. Refer to replacement battery pack number RBP852 for the PR3000LCDRTXL2U.

For model PR3000LCDRTXL2U can support model BPL48V75ART2U for external battery pack.

Read and follow the IMPORTANT SAFETY INSTRUCTIONS before servicing the battery. Service the battery under the supervision of personnel

knowledgeable of batteries and their precautions. Servicing the battery should only be performed by trained personnel.

Replacement of batteries located in an OPERATOR ACCESS AREA.

CAUTION! When replacing batteries, replace with the same number of the following battery: HR9-12(BB) for PR3000LCDRTXL2U.

CAUTION! Risk of Energy Hazard, 12 V, maximum 9 Ampere-hour battery (HR9-12). Before replacing batteries, remove conductive jewelry

such as chains, wrist watches, and rings. High energy through conductive materials could cause severe burns.

CAUTION! Risk of battery explosion, if battery is replaced by an incorrect type. Dispose of used battery according to the instructions.

CAUTION! To reduce the risk of fire, connect only to a circuit provided with 30 amperes maximum branch circuit overcurrent protection in

accordance with the National Electric Code, ANSI/NFPA 70.

CAUTION! Use only the specified CyberPower replacement battery, or battery pack. See your dealer for details.

CAUTION! The battery may present a risk of electrical shock. Do not dispose of batteries in a fire, as they may explode. Follow all local

ordinances regarding proper disposal of batteries.

CAUTION! Do not open, or mutilate the batteries. Released electrolytes may be toxic, and can be harmful to skin and eyes.

CAUTION! A battery may present a high risk of short circuit current and electrical shock.

Take the following precautions before replacing the battery:

1. Remove all watches, rings or other metal objects.

2. Only use tools with insulated handles.

3. Do not lay tools or metal parts on top of battery or any terminals.

4. Wear rubber gloves and boots.

5. Determine if the battery is inadvertently grounded. If inadvertently grounded, remove source of ground. CONTACT WITH A GROUNDED

BATTERY CAN RESULT IN ELECTRICAL SHOCK! The likelihood of such shock will be reduced if such grounds are removed during installation

and maintenance (applicable to a UPS and a remote battery supply not having a grounded circuit)

BATTERY REPLACEMENT PROCEDURE:

INPUT voltage meter: This meter measures the AC voltage from the wall outlet. The INPUT voltage readout

is used to identify the input voltage information. This can be used as a diagnostic tool to identify poor-quality

input power. Units are listed in V (Volts). When the UPS connect to any equipment, the AVR can provide a

stable 110/120V power output. In the event of a complete loss of power, severe brownout, or over voltage,

the UPS relies on its internal battery to back up to supply a consistent 110/120V output.

OUTPUT voltage meter: The Output Voltage screen measures, in real time, the AC voltage that the UPS is

providing to your connected equipment via the UPS outlets. Units are listed in V (Volts).

ESTIMATE RUN TIME: The Estimated Runtime Screen displays how many minutes of runtime can be

expected of the UPS if it were to experience a power outage. When runtime becomes shorted, the battery

capacity will decrease; (battery capacity bar indicator will be falling.) Note: The number displayed may be less

than actual runtimes for low loads.

NORMAL icon: This icon illuminates when the UPS is working under normal conditions.

BATTERY icon: When there is a severe brownout or blackout, this icon will appear followed by an alarm, (two

short beeps), indicating that the UPS is now working using its internal batteries. Once the batteries are run out

of power, (over a period of time), a constant alarm will sound. If this happens and main power has not been

restored, it is recommended that you save your files and turn off your equipment manually as soon as possible.

Automatic Voltage Regulation (AVR) icon: This icon will appear when the unit is automatically regulating

low or high AC input line voltage conditions, without resulting to the use of battery power.

SILENT MODE icon: This icon appearing indicates that the buzzer will not be beeping while in battery operating mode. During Silent mode, the

unit’s alarm does not sound until the Battery Capacity falls to < 20%.

OVER LOAD icon: This icon will appear followed by an alarm, indicating that an overload condition has been reached. To recover from the

overload condition, start unplugging your equipment from the UPS outlets until the icon disappears and the alarm stops.

FAULT icon: When activated indicates a system fault error. Please refer to the troubleshooting table for possible causes and solutions.

BATT. CAPACITY meter: BATT. CAPACITY is shown as a bar chart; each segment indicates approximately a 20% of battery capacity.

LOAD CAPACITY: Load CAPACITY is shown as a bar chart; each segment indicates approximately a 20% of load capacity.

9. USB port to PC

This is a connectivity port allowing communication and control

among the UPS and the connected computer. You should install on

your computer the PowerPanel

Business Edition software

appropriate to the operating system you are using.

10. Surge Protected Communication Ports - RJ11/RJ45

These ports are being used to protect from various surge-conditions

the standard RJ-45/RJ-11 based, (ADSL, LAN,

Phone/Modem-Lines), cabling systems.

11. Site Wire Fault Indicator

This LED will illuminate to warn the user that a wiring problem exists

within the AC receptacle, such as a bad ground, missing ground or

reversed wiring. If illuminated, disconnect all equipment and contact

an electrician to ensure outlet is properly wired.

12. Serial Port I (Primary)

Serial port I allow for bi-directional communication among the UPS

and the computer. The UPS can control the computer’s shutdown in

case of an emergency, and at the same time, the computer can

monitor the UPS and alter its various programmable parameters.

13. Serial Port II (Secondary)

Serial Port II allows the UPS to initiate the connected computer’s

graceful auto-shutdown in case of an emergency.

14. SNMP/HTTP Network slot

Remove the cover panel to install optional SNMP, allowing your

UPS be controlled and monitored via a network connection.

15. EPO (Emergency Power Off) Port:

Allow for an emergency UPS Power-Off from a remote location.

16. Ground Stud

Use the Ground Stud to ground the UPS.

17. Extended Runtime (XL) Battery Pack Connector

Provide a connection for additional CyberPower XL Battery Packs.

NOTE: Recharge the unit for at least 8 hours to ensure that the UPS performs to the expected runtimes.

Remove the front panel on

the right side.

Remove the retaining screws

of the cable protection cover,

and then remove the cover

itself.

Remove the two retaining

screws of the cable

connectors.

Disconnect the black and

red wires from the battery.

Remove the retaining screws.

Put the new battery packs back into

the compartment. Tighten up the

screws and replace the cable

protection cover and the front panel.

The primary computer

with PowerPanel

Business Edition

software connected to

the UPS with either a

serial cable or a USB

cable.

The equipment can

read information

via dry contact.

Dry connect is controlled by the PowerPanel

Software, please go to www.cyberpowersystems.com

for free download.

*NOTE: Both USB and Serial cannot be used

simultaneously.

CRITICAL LOAD

NONCRITICAL LOAD

AC INPUT

1 2

Inhaltsverzeichnis

Seite 1 - AC INPUT

IMPORTANT SAFETY WARNINGS INSTALLING YOUR UPS SYSTEM BATTERY REPLACEMENT LCD STATUS DEFINITION BASIC OPERATION The LCD display indicates a variety o

Seite 2 - GUARNTEEEQUIPMENTGUARNTEEGUA

TECHNICAL SPECIFICATIONS TROUBLE SHOOTING LCD STATUS AND SETUP FUCTIONS 1. General Mode a. Press the “Display” button to check the status of the

Kommentare zu diesen Handbüchern

Keine Kommentare

CyberPower TAA UPS Systems Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Unterbrechungsfreie Stromversorgungen (USVs) CyberPower TAA UPS Systems herunter. CyberPower Smart App Sinewave Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Unterbrechungsfreie Stromversorgungen (USVs) CyberPower TAA UPS Systems