CyberPower OR1500ELCDRM1U Bedienungsanleitung PDF herunterladen

Office Rack Mount UPS

OR1000ELCDRM1U/OR1500ELCDRM1U

User’s Manual

K01-0000058-00

IMPORTANT SAFETY INSTRUCTIONS

(SAVE THESE INSTRUCTIONS)

This manual contains important instructions that should be followed during installation and maintenance

of the UPS and batteries. Please read and follow all instructions carefully during installation and

operation of the unit. Read this manual thoroughly before attempting to unpack, install, or operate.

CAUTION! The UPS must be connected to a grounded AC power outlet with fuse or circuit breaker

protection. DO NOT plug the UPS into an outlet that is not grounded. If you need to de-energize this

equipment, turn off and unplug the UPS.

CAUTION! DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT! CyberPower Systems

does not sell products for life support or medical applications. DO NOT use in any circumstance that

would affect the operation or safety of any life support equipment, with any medical applications, or

patient care.

CAUTION! The battery can energize hazardous live parts inside even when the AC input power is

disconnected.

CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity controlled

indoor area, free of conductive contaminants. (Please see specifications for acceptable temperature and

humidity range).

CAUTION! To reduce the risk of electric shock, do not remove the cover, except to service the battery.

There are no user serviceable parts inside, except for the battery.

CAUTION! To avoid electrical shock, turn off the unit and unplug it from the AC power source before

servicing the battery or installing a computer component.

CAUTION! DO NOT USE WITH OR NEAR AQUARIUMS! To reduce the risk of fire, do not use with

or near aquariums. Condensation from the aquarium can come in contact with metal electrical contacts

and cause the machine to short out.

CAUTION! DO NOT USE WITH LASER PRINTERS! The power demands of laser printers are too

large for a UPS.

INSTALLING YOUR UPS SYSTEM

UNPACKING

The box should contain the following:

(1) PowerPanel

Business Edition software CD*1;(2) USB cable *1; (3) Phone line *1; (4) user manual*1;

(5) UPS unit*1(6)Green Power Technology description*1

OVERVIEW

The OR1000ELCDRM1U/OR1500ELCDRM1U provides automatic voltage regulation for inconsistent

utility power. The OR1000ELCDRM1U/OR1500ELCDRM1U features 1030 Joules of surge protection,

and provides battery backup during power outages. The OR1000LCDRM1U/OR1500LCDRM1U

ensures consistent power to your computer system and its included software will automatically save

your open files and shutdown your computer system during a utility power loss.

HOW TO DETERMINE THE POWER REQUIREMENTS OF YOUR EQUIPMENT

1. Make sure that the total Volt-Amp (VA) requirements of your computer, monitor, and peripheral

equipment does not exceed 1000 VA/ 1500VA.

2. Ensure that the equipment plugged into the four battery power-supplied/surge outlets does not

exceed the UPS unit's rated capacity (1000VA/600W for OR1000ELCDRM1U, 1500VA//900W for

OR1500ELCDRM1U). If the rated unit capacities are exceeded, an overload condition may occur

and cause the UPS unit to shut down and the circuit breaker to trip.

3. If the power requirements of your equipment are listed in units other than Volt-Amps (VA), convert

Watts (W) or Amps (A) into VA by performing the calculations below. Note: The equation listed

below only calculates the maximum amount of VA that the equipment can use, not what is typically

used by the equipment at given time. Users should expect usage requirements to be approximately

60% of the maximum power requirements:

Watts (W) x 1.67 = VA or Amps (A) x 230 = VA

Add the totals up for all pieces of equipment and multiply this total by 0.6 to calculate the approximate

requirements.

There are many factors that can affect the amount of power that your computer system will require.

The total load that you will be placing on the battery-powered outlets should not exceed 80% of the

unit's capacity.

BASIC OPERATION

DESCRIPTION

1. LCD module display

LCD shows all the UPS information with icons and messages.

2. Power on LED

The power on LED lights up when the UPS is ON.

3. Power Switch

Master on/off switch for equipment connected to the battery power supplied outlets.

4. LCD function selected switch

The switch can be used to select the LCD display contents Including input/output voltage and

estimated run time, etc.

5. Battery, Surge and AVR Outlets

Provides four battery power, surge protected and AVR outlets for connected equipment and ensures

temporary uninterrupted operation of your equipment during a power failure.

6. Surge Outlets

Provides two surge protected outlets for connected equipment.

7. Communication Protection Ports RJ11/RJ45

Communication protection ports will protect any standard modem, fax, telephone line, or network

cable .

8. USB Port to PC

This port allows connection and communication from the USB port on the computer to the UPS unit.

The UPS communicates its status to the PowerPanel

Business Edition software. This interface is

also compatible with the UPS application provided by Windows Vista and Mac OS X.

9. Serial Port to PC

This port allows connection and communicates from the DB-9 serial on the computer to the UPS unit..

10. Circuit Breaker

Located on the side of the UPS, the circuit breaker serves to provide overload and fault protection.

Under normal operating conditions, the circuit breaker is depressed.

11.

AC Input

Connect the AC Power cord to a properly wired and grounded outlet.

12. Expansion Port

Allow users to add the optional SNMP card.

Hardware Installation Guide

1. Your new UPS may be used immediately upon receipt. However, recharging the battery for at least

four hours is recommended to ensure that the battery's maximum charge capacity is achieved.

Charge loss may occur during shipping and storage. To recharge the battery, simply leave the unit

plugged into an AC outlet. The unit will charge in both the on and off position.

2. If you will use the software, connect the USB cable to the USB port on the UPS.

3. With the UPS unit off and unplugged, connect the computer, monitor, and any externally powered

data storage device (Zip drive, Jazz drive, Tape drive, etc. into the battery power supplied outlets.

DO NOT plug a laser printer, copier, space heater, vacuum, paper shredder or other large

electrical device into the UPS. The power demands of these devices will overload and

possibly damage the unit.

4. To protect a fax, telephone, modem line or network cable, connect a telephone cable or network cable

from the wall jack outlet to the IN jack of the UPS. Then connect a telephone cable or network cable

from the OUT jack on the UPS to the modem, computer, telephone, fax machine, or network device.

5. Plug the UPS into a 2 pole, 3 wire grounded receptacle (wall outlet). Make sure the wall branch

outlet is protected by a fuse or circuit breaker and does not service equipment with large electrical

demands (e.g. air conditioner, refrigerator, copier, etc. Avoid using extension cords. If used, the

extension cord must be grounded and rated for 15 amps.

6. Depress the power switch to turn the unit on. The power on indicator light will illuminate and the unit

will "beep" once.

7. If an overload is detected, an audible alarm will sound and the unit will emit one long beep. To

correct this, turn the UPS off and unplug at least one piece of equipment from the battery power

supplied outlets. Wait 10 seconds. Make sure the circuit breaker is depressed and then turn the

UPS on.

8. Your UPS is equipped with an auto-charge feature. When the UPS is plugged into an AC outlet, the

battery will automatically recharge.

9. To maintain optimal battery charge, leave the UPS plugged into an AC outlet at all times.

10. To store your UPS for an extended period, cover it and store with the battery fully charged.

Recharge the battery every three months to ensure battery life.

BATTERY REPLACEMENT

CAUTION! Read and follow the IMPORTANT SAFETY INSTRUCTIONS before servicing the battery.

Service the battery under the supervision of personnel knowledgeable of batteries and their

precautions.

CAUTION! Use only the specified type of battery. See your dealer for replacement batteries.

CAUTION! The battery may present the risk of electrical shock. Do not dispose of batteries in a fire,

as they may explode. Follow all local ordinances regarding proper disposal of batteries.

CAUTION! Do not open or mutilate the batteries. Released electrolyte is harmful to the skin and eyes

and may be toxic.

CAUTION! A battery can present a high risk of short circuit current and electrical shock. Take the

following precautions before replacing the battery:

1. Remove all watches, rings or other metal objects.

2. Only use tools with insulated handles.

3. DO NOT lay tools or other metal parts on top of battery or any battery terminals.

4. Wear rubber gloves and boots.

5. Determine if the battery is inadvertently grounded. If inadvertently grounded, remove source of

ground. CONTACT WITH A GROUNDED BATTERY CAN RESULT IN ELECTRICAL SHOCK! The

likelihood of such shock will be reduced if such grounds are removed during installation and

maintenance (applicable to a UPS and a remote battery supply not having a grounded circuit)

BATTERY REPLACEMENT PROCEDURE:

1. Remove the right-side of the

faceplate.

2. Remove the three retaining

screws on the cable protection

cover then remove the

cover.faceplate.

3. Disconnect the black and red

1 2

Inhaltsverzeichnis

Seite 1 - BATTERY REPLACEMENT

Office Rack Mount UPS OR1000ELCDRM1U/OR1500ELCDRM1U User’s Manual K01-0000058-00 IMPORTANT SAFETY INSTRUCTIONS (SAVE THESE INSTR

Seite 2 - TECHNICAL SPECIFICATIONS

DEFINITIONS FOR ILLUMINATED LCD INDICATORS Line mode UPS Status Display Capacity Display Digital Value Display Selec

Kommentare zu diesen Handbüchern

Keine Kommentare

CyberPower OR1500ELCDRM1U Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Unterbrechungsfreie Stromversorgungen (USVs) CyberPower OR1500ELCDRM1U herunter. CyberPower OR1500ELCDRM1U User's Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Unterbrechungsfreie Stromversorgungen (USVs) CyberPower OR1500ELCDRM1U